Configuring Endpoint Settings
147
To configure mix sending via the web user interface:
1. Click on Setting->Video & Audio.
2. In the Presentation block, select the desired value from the pull-down list of Mix.
3. Click Confirm to accept the change.
To display high quality video image, you can configure camera settings as required,
such as white balance, exposure and sharpness.
Camera settings parameters are described below.
Configures the value of camera
exposure compensation.
Off
1
2
3
Default: 1
Exposure compensation is used
to compensate the camera
effectively when shooting in a
Remote Control
Web User Interface
To Next Page
Loading...
