Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint
148
backlight environment. If the
environment light is dark,
increase the compensation
value.
Configures the value of camera
flicker frequency.
50Hz
60Hz
Default: 50Hz
Note: Indoor lights powered by a
50Hz or 60Hz power source can
produce a flicker. You can adjust
the camera flicker frequency
according to the power source
the light is powered by.
Remote Control
Web User Interface
Configures the white balance
mode of the camera.
Auto—Yealink recommends
this setting for most
situations. It calculates the
best white balance setting
based on lighting conditions
in the room.
One push—Use the
predefined color
temperature settings to
provide acceptable color
reproduction.
ATW—Automatically adjust
the white balance based on
the video image shoot by
the camera.
Manual—Manually set red
and blue gain.
Default: Auto
Remote Control
Web User Interface
Configures the red gain of the
camera.
Valid Values: 0-100
Remote Control
Web User Interface
To Next Page
Loading...
