Configuring Endpoint Settings
151
To configure camera settings via the web user interface:
1. Click on Setting->Camera.
2. Configure the camera settings.
3. Click Confirm to accept the change.
To configure camera settings via the remote control:
1. Select Menu->Video & Audio->Camera General Settings.
2. Configure the camera settings.
3. Press the Save soft key to accept the change.
Local video is displayed on the display device of the far site during a call. For the best
view, you can enable the Far Control of Near Camera feature to allow the far site to
control the focus and angle of the local camera. You can also specify whether the far
site is allowed to store and use the local camera presets.
To Next Page
Loading...
