Yealink VC110 - Page 160

Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint
150
Parameter
Description
Configuration Method
 Middle
 High
Default: Middle
Hangup Mode
Enables or disables the camera
to flip the image view when
camera is handed at
up-side-down position
Default: Off
Remote Control
Web User Interface
Camera Pan
Direction
Configures the pan direction of
the camera.
 Normal
 Reversed
Default: Normal
If the camera reversed mode is
enabled, the camera pan
direction will be reversed when
pressing the left and right
navigation keys on the remote
control. In this case, you can set
the camera pan direction to
Reversed.
Remote Control
Web User Interface
Camera Map
Enables or disables the preview
of camera presets.
Default: On
Note: If it is set to on, you can
view the pre-saved camera
presets.
Remote Control
Web User Interface
Clear Preset
Clears all camera presets.
Remote Control
Web User Interface
Reset Camera
Reset the camera settings to
factory defaults.
Note: The camera presets will
also be cleared.
Remote Control
Web User Interface