Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint
168
3. Click Delete Calllog, and select Selected.
The web user interface prompts ‖Delete the calllog ‗xxx‘？‖
5. Click Confirm to delete the call log.
You can also select Delete All from the from the pull-down list of Delete Calllog to delete
all call log.
When you enter a few characters in the dialing screen, the endpoint will search for
contacts from the enabled search source lists, and display the result in the dialing
screen. The lists can be Local Directory, History and LDAP.
To match the desired list, you need to enable the search source list first. If you want to
match the LADP list, make sure LDAP is already configured. For more information on how
to configure LDAP, refer to LDAP on page 162.
To configure search source list in dialing via the web user interface:
1. Click on Directory->Setting.
2. In the Search Source List In Dialing block, select the desired list from the Disabled
column and click .
The selected list appears in the Enabled column.
3. Repeat step 2 to add more lists to the Enabled column.
4. (Optional.) To remove a list from the Enabled column, select the desired list and
To Next Page
Loading...
