Yealink VC110 - Page 42

Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint
32
LED Status
Description
Off
The VC110 is powered off.
Indicator LED on the VCP40 phone:
LED Status
Description
Solid red
The phone is initializing.
The VCP40 is muted when the VC110 is during a call.
Flashing red
The phone is ringing.
Solid green
The phone is placing a call.
There is an active call on the phone.
Off
The phone is not connected to the cable hub.
The phone is idle.
Battery indicator LED on the VCM60 video conferencing wireless microphone:
LED Status
Description
Solid green
The VCM60 is turned on within the first 5 seconds.
The battery capacity reaches 100% during charging.
Flashing red
The battery capacity can maintain less than 1 hour.
Flashing green
The VCM60 is charging.
Off
Other status.
Mute indicator LED on the VCM60 video conferencing wireless microphone:
LED Status
Description
Fast flashing green
The VCM60 is searching the dongle.
Green and in breathing
state
The VCM60 registers with the dongle, and then enters
the online standby mode.
Solid green
The VC110 is placing a call.
The VC110 is in a call.
Solid red
The VC110 is muted during a call.
Fast flashing orange
The VCM60 enters registration mode.
Slowly flashing orange
The VCM60 fails to search the dongle, and then enters
the offline standby mode.
Off
The VCM60 is turned off.
The VCM60 runs out of battery.