Getting Started
41
You have two options for power and network connections. Your system administrator will
advise you which one to use.
AC power (Optional)
Power over Ethernet (PoE)
AC Power (Optional)
To connect the AC power:
1. Locate the DV12V port on the cable hub, and connect it to the electrical power
outlet with the supplied power adapter.
2. Locate the Internet port on the cable hub, and connect it to the internet port on the
wall or on the switch/hub device with the supplied 2m Ethernet cable.
Note
Power over Ethernet
With the included or a regular Ethernet cable, the VC110 video conferencing endpoint
can be powered from a PoE-compliant switch or hub.
The VC110 video conferencing endpoint should be used with Yealink original power
adapter (12V/2A) only.
To Next Page
Loading...
