Yealink VC110 - Page 71

Configuring Network
61
TLV Type
TLV Name
Description
System Description
Description of the endpoint.
Description includes firmware version of
the endpoint.
System Capabilities
The supported and enabled endpoint
capabilities.
The Telephone capability is supported
and enabled by default.
Port Description
Description of port that sends data unit.
The default value is ―WAN PORT‖.
IEEE Std 802.3
Organizationally
Specific TLV
MAC/PHY
Configuration/Status
Duplex mode and network speed
settings of the endpoint.
The Auto Negotiation is supported and
enabled by default.
The advertised capabilities of PMD.
Auto-Negotiation is:
100BASE-TX (full duplex mode)
100BASE-TX (half duplex mode)
10BASE-T (full duplex mode)
10BASE-T (half duplex mode)
TIA
Organizationally
Specific TLVs
Media Capabilities
The MED device type of the endpoint and
the supported LLDP-MED TLV type can be
encapsulated in LLDPDU.
The supported LLDP-MED TLV types are:
LLDP-MED Capabilities, Network Policy,
Extended Power via MDI-PD, Inventory.
Network Policy
Port VLAN ID, application type, L2 priority
and DSCP value.
Extended
Power-via-MDI
Power type, source, priority and value.
Inventory –
Hardware Revision
Hardware revision of the endpoint.
Inventory –
Firmware Revision
Firmware revision of the endpoint.
Inventory –
Software Revision
Software revision of the endpoint.
Inventory – Serial
Serial number of the endpoint.