Yealink VC110 - Page 79

Configuring Network
69
3) In the CA Certificates field, click Browse to locate the desired CA
certificate (*.pem,*.crt, *.cer or *.der) from your local endpoint.
4) In the Device Certificates field, click Browse to locate the desired client
certificate (*.pem or *.cer) from your local endpoint.
5) Click Upload to upload the certificates.
c) If you select PEAP-MSCHAPv2:
1) Enter the user name for authentication in the Identity field.
2) Enter the password for authentication in the MD5 Password field.
3) In the CA Certificates field, click Browse to locate the desired certificate
(*.pem,*.crt, *.cer or *.der) from your local endpoint.