Yealink VC110 - Page 94

Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint
84
To configure STUN for SIP account via web user interface:
1. Click on Account->SIP Account.
2. Select STUN from the pull-down list of NAT_Traversal.
3. Click Confirm to accept the change.
To configure STUN for SIP direct account via web user interface:
1. Click on Account->SIP Direct Account.
2. Select STUN from the pull-down list of NAT_Traversal.
3. Click Confirm to accept the change.
To configure STUN server via the remote control:
1. Select Menu->Advanced (default password: 0000) ->NAT/Firewall.
Mark the ON radio box in the STUN Active field.