MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 134
If you enable country code, the country code will be added before the numbers
which you want to send SMS. Also you can use a custom country code, which
makes it more flexible.
·Receive mails every
The interval of receiving mails from POP3 server.
·Access Code
This PIN code is used to verify the subject of the emails received. If the form of
email passes the verification, it will be send out by SIM card. If not, this email
will be deleted immediately.
3) Email Settings
Figure 6-84 SMTP/POP Server Settings
Note:
1. If you want to use ―SMS to Email‖, please configure POP3 setting.
2. If you configure the POP3 setting, MyPBX will download emails from the mail
server regularly. Once downloaded, the emails will be deleted from the server.
·Email Address
This email address will be used to:
1. Send email to the addresses listed on ―SMS to Email‖ setting.
2. Receive email and send the text of the email to the target mobile number by
SMS.
Note: If you use Gmail, just put your user name here. E.g. email address:
test@gmail.com, you just put ―test‖ here.
·Password
Input the password of this email here.
·SMTP Server (SMTP)
·SMTP Server Port
·Receive Server (POP3)
·Receive Server Port
To Next Page
Loading...
Need help?
General
