Yeastar Technology MyPBX Standard V6 User Manual

MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 184
APPENDIX G How to Use Email to
SMS
How to use Email to SMS
You need to send an email to the specified email address (set in Email Settings.
In this case, it is lears@yeastar.com).The content of this email will be sent to the
number you want as a message. The subject (title) of the email will determine
the number. Here are some examples of the formats to the subject of the email.
Example:
1. Send message with no PIN code and default GSM port.
Format: phonenumber
If the subject is "12345678", the text of this email (―Welcome to Yeastar!‖) will
be sent to number "12345678" through the first available GSM trunk (No PIN
code should be set by administrator).
Figure G-1
2. Send message with no PIN code and specified GSM port.
Format: port:portnumber-phonenumber
If the subject is "port:9-12345678", the text of this email (―Welcome to
Yeastar!‖) will be sent to the number "12345678" through GSM trunk 9 (No PIN
code should be set by administrator).

Yeastar Technology MyPBX Standard V6 Specifications

General

Brand	Yeastar Technology
Model	MyPBX Standard V6
Category	Switch
Language	English