MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 139
9.1 Make outbound call
To make an outbound call, we need to add trunk first. There are 3 types of VoIP
Trunk.
·VoIP Trunk: Connected to remote VoIP service server.
You should get an IP address with user name/ password from the provider.
·Service Provider: Connected to service provider server.
You will get only IP address for authorization.
·Analog Trunk: FXO ports of MyPBX, connected to a local PSTN.
·GSM/UMTS Trunk: GSM ports of MyPBX, connected to GSM Network.
·BRI Trunk: BRI ports of MyPBX, connected to ISDN provider
What are FXO and FXS?
FXS (Foreign Exchange Station) is an interface which drives an analog
telephone or FAX machine. FXS interfaces deliver power, provide ringing, and
use FXO signaling. FXS interfaces are what allow you to hook telephones and
other analog devices to your PBX
FXO (Foreign Exchange Office) is an interface that connects to a phone line to
supply your PBX with access to a public telephone network. FXO interfaces use
FXS signaling. FXO interfaces allow you to connect your PBX to real analog
phone lines.
9.1.1 Sample Routing via VoIP Trunk
Let‘s configure all inside extensions to dial ―0‖ through the VoIP Trunk.
1. Add VoIP service provider
Before we add this, please make sure you have a VoIP Trunk account.
TrunksVoIP Trunk SIP Trunk
Enter your account information on this page, and click Save.
To Next Page
Loading...
Need help?
General
