MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 163
Figure 3-5
You need to input the new password twice to take effect.
3.3 AMI settings*
The Asterisk Manager Interface (AMI) allows a client program to connect to an
Asterisk instance and issue commands or read events over a TCP/IP stream.
Integrators will find this particularly useful when trying to track the state of a
telephony client inside Asterisk, and directing that client based on custom (and
possibly dynamic) rules.
For more information, you can refer to this page:
http://www.voip-info.org/wiki/view/Asterisk+manager+API
Note: this feature is disabled by default; there is no need to enable it for general
use. If it‘s enabled, please change account and configure IP restriction.
To Next Page
Loading...
Need help?
General
