Yeastar Technology MyPBX Standard V6 User Manual

MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 30
5.2.4 AMI Settings
The Asterisk Manager Interface (AMI) is a system monitoring and management
interface provided by Asterisk. It allows live monitoring of events that occur in
the system, as well enabling you to request that Asterisk perform some action.
The actions that are available are wide-ranging and include things such as
returning status information and originating new calls. Many interesting
applications have been developed on top of Asterisk that take advantage of the
AMI as their primary interface to Asterisk.
There are two main types of messages on the Asterisk Manager Interface:
manager events and manager actions.
The 3
rd
party software can work with MyPBX using AMI interface. It is disabled
by default. If necessary, you can enable it.
Figure 5-16 AMI Settings
Username & password: after enabling AMI, you can use this username and
password to log in MyPBX AMI
IP Restriction: you can set which IP can log in MyPBX AMI interface
5.2.5 Database Grant
Standard V7 are using MySQL database from 14.18.0.22. The 3
rd
party software
can access MySQL via internet. Before that, you need to grant the authority to
the database user.
After entering ―Database Grant‖ page, clicking ―Add‖, you can add a database
user, set user password and grant authority.
Figure 5-17 Database Grant

Yeastar Technology MyPBX Standard V6 Specifications

General

Brand	Yeastar Technology
Model	MyPBX Standard V6
Category	Switch
Language	English