Yeastar Technology MyPBX Standard V6 User Manual

MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 174
APPENDIX C How to Configure
External Storage
Before External storage can be properly configured, an SMB share folder
accessible from MyPBX must be set up on a Windows based machine. Once that
has been set up, please follow the steps below.
Step 1 Add a new folder, rename it, and set this new folder‘s share Properties
according to Figure C-1.
Figure C-1 Set up share Properties
Step 2 Enter the new folder and create a new text file, then rename this file to
status.txt. This step is very important, DO NOT forget to create the status.txt
file.
Step 3 Configure External storage settings on MyPBX to Figure C-2.

Yeastar Technology MyPBX Standard V6 Specifications

General

Brand	Yeastar Technology
Model	MyPBX Standard V6
Category	Switch
Language	English