Yeastar Technology MyPBX Standard V6 User Manual

MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 38
5.5 System Preferences
In this page, we can set other system preference, like the password for admin
account, system date and time, firmware update, hot standby, backup and
restore, reset and reboot.
5.5.1 Password Settings
MyPBX has 3 accounts: admin, user, and cdr. User and cdr account is disabled
by default.
Admin account:
The default password for account ―admin‖ is ―password‖. To change the
password, select ―admin‖ in ―User‖, enter the old password and new password,
and click ―Save‖. The system will then prompt you to re-login using your new
password.
After you enter the new password, MyPBX will prompt the password strength. It
is recommended that you use numbers, upper-case letters, and lower-case
letters to increase the security.
When you log in MyPBX using ―admin‖ account, you can enable ―user‖ and ―cdr‖
account; also, you can change their passwords.
Figure 5-27 Modify admin‘s Password
User account:
User account is disabled by default and its default password is ―password‖.
When enabling ―user‖ account for the first time, MyPBX will ask you to
change ―user‖ password. If you don‘t change it, you can‘t enable ―user‖ account.
To change the password, select ―user‖ in ―User‖, enter the old password and
new password, and click ―Save‖. The system will then prompt you to re-login
using your new password.
After you enter the new password, MyPBX will prompt the password strength. It
is recommended that you use numbers, upper-case letters, and lower-case
letters to increase the security.

Yeastar Technology MyPBX Standard V6 Specifications

General

Brand	Yeastar Technology
Model	MyPBX Standard V6
Category	Switch
Language	English