MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 31
Username/password: The 3
rd
party can use this username and password to
access the MySQL.
Database: there are 2 options, CDR and Record. If you choose CDR, then this
user has authority to check CDR database; if you choose Record, then the user
has authority to check which call has been recorded automatically.
5.2.6 Alert Settings
If the device is attacked, the system will notify users the alert via call or E-mail.
The attack modes include IP attack and Web Login.
For more details on the system security configuration, please refer to
APPENDIX B MyPBX Security Configuration Guide.
Figure 5-18 Alert Settings
1. IPATTACK
When the system is attacked by IP address, the firewall will add the IP to auto
IP Blacklist and notify the user if it match the protection rule.
1) Phone Notification Settings
·PHONE Notification
Whether enable phone notification.
·Number
The numbers could be set for alert notification; users can setup multiple
extension and outbound phone numbers. Please separate them by ―;‖.
Example: ―500;9911‖, if the extension has configured Follow Me Settings, the
call would go to the forwarded number directly.
·Attempts
The attempts to dial a phone number when there is no answer.
·Interval
The interval between each attempt to dial the phone number. Must be greater
than 3 seconds, the default value is 10 seconds.
·Prompt
Users will hear the prompt while receiving the phone notification.
To Next Page
Loading...
Need help?
General
