Yeastar Technology MyPBX Standard V6 User Manual

MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 191
APPENDIX J How to Use TLS in
MyPBX
J.1 How to register IP phones to MyPBX via TLS
MyPBX is working as a SIP server, IP phones register to MyPBX as extensions via
TLS.
1. Enable TLS in MyPBX‟s web interface
Click ―PBXSIP settingsGeneral‖ to get the settings about TLS, which is
disabled by default. If you are using MyPBX standard, please find it in ―Internal
SettingsSIP Settings‖ page.
Figure J-1
·TLS Port
Port use for Sip registrations, Default is 5061.
·T LS Verify Server
When using MyPBX as a TLS client, whether or not to verify server‘s certificate.
It is ―No‖ by default.
·TLS Verify Client
When using MyPBX as a TLS server, whether or not to verify client‘s certificate.
It is ―No‖ by default.
·TLS Ignore Common Name

Yeastar Technology MyPBX Standard V6 Specifications

General

Brand	Yeastar Technology
Model	MyPBX Standard V6
Category	Switch
Language	English