Yeastar Technology MyPBX Standard V6 User Manual

MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 16
5 System
Click to access.
In this page, we can configure the network settings, firewall settings, storage
management and some other settings like firmware update and hot standby.
5.1 Network Preferences
5.1.1 LAN Settings
Figure 5-1 LAN Settings
·DHCP
If this option is set, MyPBX will use DHCP to get an available IP address from
your local network. Not recommended as without the right IP address you
cannot access MyPBX.
·Enable SSH
This is the advanced way to access the device. You can use the software ―putty‖
to access the device. In the SSH access, you can do more advanced settings and
debug. Disabled by default.
·Port: the default is 8022; you can change it.
·Enable FTP
Users will be able to log in MyPBX via FTP if FTP is enabled. You can access FTP
resource on MyPBX via Windows explorer or Web browser.

Yeastar Technology MyPBX Standard V6 Specifications

General

Brand	Yeastar Technology
Model	MyPBX Standard V6
Category	Switch
Language	English