Yeastar Technology MyPBX Standard V6 User Manual

MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 133
6.7.10 SMS Settings
When GSM/UMTS modules are installed, SMS feature is supported.
1) Enable SMS to Email
Figure 6-81 Enable SMS to Email
If you enable this, as soon as the GSM/UMTS trunks receive a short message,
MyPBX will send the text of this message to the email addresses listed on the
Email List.
You can add email addresses to the Email List.
Figure 6-82 SMS to Email Settings
2) Enable Email to SMS
If you enable this, you can use MyPBX to send out message by sending an email
to the specified address.
Figure 6-83 Email to SMS Settings
·Enable Country Code
If you want to add country code before the dialed numbers, please tick this.
·Country Code

Yeastar Technology MyPBX Standard V6 Specifications

General

Brand	Yeastar Technology
Model	MyPBX Standard V6
Category	Switch
Language	English