Yeastar Technology MyPBX Standard V6 User Manual

MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 142
9.2 Incoming call
9.2.1 Sample Routing to an IVR
Let‘s configure an incoming call to route to the IVR. In the IVR itself, let‘s
configure digit 0 to route the call to extension 300, and digit 1 to route the call
to extension 301.
1. Add IVR
To add a new IVR, go to IVR Create New IVR.
Figure 9-5 Create IVR

Yeastar Technology MyPBX Standard V6 Specifications

General

Brand	Yeastar Technology
Model	MyPBX Standard V6
Category	Switch
Language	English