Yeastar Technology MyPBX Standard V6 User Manual

MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 170
MyPBX allows you to configure password for outbound routes.
Click ―PBXOutbound Call Control Outbound Route‖.
For example, the password you need is 5503333
Dial pattern: 00. <Don‘t miss the dot here>
Password: 5503333
Choose the allowed extension and the trunk to the right side like this:
Figure 4-1
Save and apply the changes, when 300 and 301 pick up headsets and dial a
international number, MyPBX will ask for the password, if passed, the call will be
dialed out. If not, the call will be dropped.

Yeastar Technology MyPBX Standard V6 Specifications

General

Brand	Yeastar Technology
Model	MyPBX Standard V6
Category	Switch
Language	English