Yeastar Technology MyPBX Standard V6 User Manual

MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 177
Figure D-2 MyPBX Network setting-private IP
2. If MyPBX has a public IP (i.e. is connected directly to your Internet service
provider), the network settings should be configured according to Figure D-3:
Figure D-3 MyPBX Network setting-public IP
Now, MyPBX has been configured as a public IP, so there is no need to
configure NAT again, just leave all settings in ―NAT‖ blank.

Yeastar Technology MyPBX Standard V6 Specifications

General

Brand	Yeastar Technology
Model	MyPBX Standard V6
Category	Switch
Language	English