MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 49
·Ring Out
Check this option if you want to custom the ring time. Tone will stop over the
time defined.
8) Follow me (Call Forwarding)
This function sets inbound call forwarding on an extension. An administrator can
configure Follow Me for this extension.
9) Volume Settings
Rxgain: The Volume sent to FXS extension.
Txgain: The Volume sent out by the FXS extension
10) Mobility Extension
MyPBX allows you to use your mobile phone as an extension. If you set your
mobile phone as a mobility extension and then you call MyPBX with this mobile
phone, you will hear a dial tone. MyPBX will recognize your call as a call from an
extension. You can dial the number of other extensions (your caller ID will be
the number of your extension) or dial out via outbound routes just like dialing
from your extension.
Note: If callback is enabled in the inbound route, the mobility extension
function of this inbound route will be disabled.
Enable Mobility Extension
Enable this feature.
·Mobility Extension Number
When you dial the server with this number, the mobile phone gets the
permission of the extension. For example: dialing the other extensions, playing
the voicemail.
·Ring Simultaneously
When the extension has an incoming call, it rings its mobility extension
simultaneously.
·Outbound Prefix
Fill in proper prefix of mobile number so that it can match an outbound route to
dial the mobility extension. For example, if you set the prefix 9, it will send ―9+
mobility extension number‖ to the outbound route.
11) Call ID type
·Call ID Setting
Normally, you choose the ―default‖ option except for using MyPBX in Japan, in
To Next Page
Loading...
Need help?
General
