EasyManuals Logo

Yeastar Technology MyPBX Standard V6 User Manual

Yeastar Technology MyPBX Standard V6
219 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #55 background imageLoading...
Page #55 background image
MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 55
Check this option if you want to customize the ring time. Ring tone will stop over
the time defined.
8) Follow me (Call Forwarding)
Call forwarding for an extension can be configured here. The administrator can
configure Follow Me option for this extension. If you want to transfer the call to
an outbound number, please follow the dial pattern of outbound route filled in
the outbound number.
For example: forwarding a call to your mobile phone number 123456789, and
the dial pattern of outbound route is 9., you should fill in 9123456789 here.
9) IP Restriction
·Enable IP Restriction
Check this option to enhance the VoIP security for MyPBX. If this option is
enabled, only the permitted IP/Subnet mask will be able to register this
extension number. In this way, the VoIP security will be enhanced.
For more details on the system security configuration, please refer to
APPENDIX B MyPBX Security Configuration Guide.
·Permitted IP address/Subnet mask
The input format should be ―IP address‖ + ―/‖ + Subnet mask.
E.g."192.168.5.100/255.255.255.255" means only the device whose IP
address is 192.168.5.100 is allowed to register this extension number.
E.g."192.168.5.0/255.255.255.0" means only the device whose IP address is
192.168.5.XXX is allowed to register this extension number.
10) Mobility Extension
MyPBX allows you to use your mobile phone as an extension. If you set your
mobile phone as a mobility extension and then you call MyPBX with this mobile
phone, you will hear a dial tone. MyPBX will recognize your call as a call from an
extension. You can dial the number of other extensions (your caller ID will be
the number of your extension) or dial out via outbound routes just like dialing
from your extension.
Note: If callback is enabled in the inbound route, the mobility extension
function of this inbound route will be disabled.
·Enable Mobility Extension
Enable this feature.
·Mobility Extension Number
When you dial the server with this number, the mobile phone gets the
permission of the extension. For example: dialing the other extension, playing
the voicemail.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yeastar Technology MyPBX Standard V6 and is the answer not in the manual?

Yeastar Technology MyPBX Standard V6 Specifications

General IconGeneral
BrandYeastar Technology
ModelMyPBX Standard V6
CategorySwitch
LanguageEnglish

Related product manuals