MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 64
4) Line keys settings
We can configure the line key settings for this IP phone.
Figure 6-16 Configure Line Key
6.1.2.4 Not configured phone
In this section, MyPBX will scan all the supported IP phones and display them
here. We can click the ―MAC address‖ of an IP phone and input the
corresponding information in the pop-up window, like figure 6-13.
Figure 6-17 Not Configured Phone List
6.1.2.5 Upload a file
Click ―Upload a file‖ and choose the configuration file of IP phone in the popup
window.
Note: the file format must be
Yealink: .cfg file
Snom: .htm file
Grandstream: .xml file
Please edit the configuration files in advance before uploading.
Figure 6-18 Upload Configuration File