MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 74
Figure 6-29 Add a SIP Trunk
·Type
SIP—Identifies whether the trunk sends and receives calls using the VoIP
protocol SIP.
·Provider Name
A unique label to help you identify this trunk when listed in outbound rules,
incoming rules etc. E.g. ―yeastar‖.
·Hostname/IP
Service provider‘s hostname or IP address.5060 is the standard port number
used by SIP protocol. Don‘t change this part if it is not required.
.Domain
VoIP provider‘s server domain name.