MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 76
This will be the transport method used by the SIP Trunk. This method is given by
the SIP trunk provider. The options are UDP (default) or TCP or TLS.
·Enable SRTP
Define if SRTP is enabled for this trunk.
·Qualify
Send check alive packets to the SIP provider.
·DTMF mode
Set default mode for sending DTMF of this trunk. Default setting: rfc2833
·DOD
DOD (Direct Outward Dialing) means the caller ID displayed when dialing out.
Before configuring this, please make sure the provider supports this feature.
·Associated Extension
The extension making call out via SIP Trunk will display the associated DOD.
·Add DOD
Add DOD for one associated extension.
·Add Bulk DOD
Figure 6-30 Add a SIP Trunk
Add bulk DOD for bulk extensions in ascending sequence with the ―Begin DOD‖
you fill in. For example, if the Associated Extensions are 100, 101, 102, 103, 104,
105 with ―Begin DOD‖ as 5500100, the corresponding DOD will be 5500100,
5500101, 5500102, 5500103, 5500104, and 5500105.
To Next Page
Loading...
Need help?
General
