MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 84
·Rrmemory Hunt
Round robin with memory, remembers which trunk was used last time, and then
use the next available trunk to call out.
·Office Hours
When a specific office hour is selected, this outbound route can only be used
during this office hour, and can‘t be used in non-office hours.
·Dial Pattern
X: Any Digit from 0-9
Z: Any Digit from 1-9
N: Any Digit from 2-9
[12345-9] : Any digit in the brackets (in this example, 1,2,3,4,5,6,7,8,9)
The ―.‖ Character will match any remaining digits. For example, ―9011.‖ will
match any phone number that starts with ―9011‖, excluding ―9011‖ itself.
The ―!‖ will match none remaining digits, and causes the matching process to
complete as soon as it can be determined that no other matches are possible.
Example 1: NXXXXXX will match any 7-digit phone number.
Example 2: 1NXXNXXXXX will match a phone number starting with a 1,
followed by a 3-digit area code, and then 6-digit number.
·Strip
Allows the user to specify the number of digits that will be stripped from the
front of the phone number before the call is placed. For example, if users must
press 0 before dialing a phone number, one digit should be stripped from the
dial string before the call is placed.
·Prepend
These digits will be prepended to the phone number before the call is placed. For
example, if a trunk requires 10-digit dialing, but users are more comfortable
with 7-digit dialing, this field could be used to prepend a 3-digit area code to all
7-digit phone numbers before calls are placed.
·Add
Add multiple dial patterns in this outbound route.
·Member Extensions
Define the extensions that will be permitted to use this outbound route.
·Member Trunks
Define the trunks that can be used for this outbound route.
To Next Page
Loading...
Need help?
General
