MyPBX Standard V6/V7 Administrator's Guide
www.yeastar.com Page 90
·Ring Group Name
This option defines a name for this group, e.g. ―Sales‖. ―Ring Group Name‖ is a
label to help you identify this group in the group list.
·Ring Group Number
This option defines the numbered extension that can be dialed to reach this
group.
·Strategy
This option sets the Ringing Strategy for this Group. The options are as follows:
1. Ring All Simultaneously: Ring all available Extensions simultaneously.
2. Ring Sequentially: Ring each extension in the group one at a time.
·Mobility Extension Rings Simultaneously
If set to yes, when the extension in the Ring group is called, the associated
mobility extension will ring simultaneously. Beforehand, the option of ―Rings
Simultaneously‖ should be ticked in the extension settings.
·Seconds to ring each member
1. If the strategy is ―Ring All Simultaneously‖, it means the number of seconds
to ring this group before routing the call according to the ―Destination if No
Answer‖ settings.
2. If the strategy is ―Ring Sequentially‖, it means the number of seconds to ring
a single extension before moving onto the next one.
·Ring Group Members
An extension can be made a member of this ring group by moving it into
the ―Selected‖ box.
·Destination If No Answer
When all members on this group fail to answer the call, system will handle the
call according to the selected destination.
To Next Page
Loading...
Need help?
General
