2-22
IM AQ1210-01EN
Operation Lock
You can lock the following operations using a PIN (password).
Operations That Can Be Locked
• This instrument’s emission of light
• The REAL TIME and AVG keys of the OTDR function
• The light source or visible light source ON soft key when an light source option (/SLT, /HLT, /VLS)
is installed
• The LS Power Adjust soft key in an auto loss test
(LS, loopback test)
• The LS Power Adjust soft key in an multi-core loss test (LS, loopback test)
• The Loss Test START soft key for executing the LS or loopback test of the auto loss test
• The Loss Test START soft key for executing the multi-core loss test
• Changing the measurement mode of the OTDR feature
• Changing the measurement mode from Simple mode to Detail mode
• Changing the measurement mode from Simple mode to multi wavelength measurement mode
PIN
The following two PINs are available.
• User PIN
A PIN required to perform the above operations. The default value is 0000.
• Administrator PIN
A PIN required to set the user PIN and restrict the above operations.
The default value is 0000.
Cursor Display Format
You can select the cursor display format from the following.
CROSS(+): The position on the waveform is displayed with vertical and horizontal cursors that
intersect.
LINE(¦ ): The position on the waveform is displayed with a vertical cursor.
Line display
Work Completion Notice
For details, see the explanation in section 3.3.
2.3 Display (OTDR) Conditions
To Next Page
Loading...
Need help?
General
