3-4 <3. Name of Each Part/Starting and Shutting Down the Equipment >
IM 80J01A01-01E
Utility Box
(1) Key switch
Laser power gets on and off by this key
(2) POWER Lamp
Lights when the power switch (7) of Utility Box is on, and lights out
when the switch is off
(3) MAIN UNIT Lamp
Lights when connected with CQ1 Main Unit
(4) GAS MIXER Lamp
Not in use
(5) READY Lamp
Lights when lasers are enable, and lights out when lasers are
disable, and flicks when lasers are initializing
(6) EMISSION Lamp
Lights when laser emits, and lights out when laser is off
(7) Power Switch
Switch ON to power on CQ1 Main Unit
Switch OFF to power off CQ1 Main Unit
To Next Page
Loading...
Need help?
General
