<4. Measurement Procedures> 4-15
IM 80J01A01-01E
Set bath cover and tighten 4 screws.
In case that the screws can’t be fastened properly, adjust position of
bath cover so that the screws are fastened properly.
Set sub cover and tighten 2 screws.
Turn the power switch ON, then turn the key switch ON..
CAUTION
After turning power switch ON, the door closes automatically. Please
be careful not to pinch your fingers or others.
Immediately pull out the AC cord from inlet of equipment, when you
notice smoke coming out of the main unit, foul smell, abnormal noise or
any other abnormality.
To Next Page
Loading...
