<4. Measurement Procedures> 4-29
IM 80J01A01-01E
In case of using sample holder, set it in CQ1 as projection portion faces
left-side of CQ1.
CAUTION
If you don’t set microplate or sample holder properly, it may result to
equipment damage. Please confirm that 4 corners of the microplate or
sample holder are set on stage and it is moved lightly (not to be stuck
to edge of sample setting place).
CAUTION
Immediately pull out the AC cord from inlet of equipment, when you
notice smoke coming out of the main unit, foul smell, abnormal noise or
any other abnormality.
To Next Page
Loading...
Need help?
General
