5-8
IM 710105-17E
5.1 List of Commands
Command Function Page
:CURSor[:TY]:VERTical:T<x>:VAL
ue?
QueriesthetimevalueofaΔTcursor. 5-88
:CURSor[:TY]:VERTical:TRACe
SetsorqueriesthesourcewaveformthatyouwanttomeasureusingtheΔT
cursors.
5-88
:CURSor[:TY]:VERTical:V<x>?
QueriesallverticalaxissettingsforaΔTcursor. 5-88
:CURSor[:TY]:VERTical:V<x>:STA
Te
Setsorqueriestheon/offstatusoftheverticalvalueofaΔTcursor. 5-88
:CURSor[:TY]:VERTical:V<x>:VAL
ue?
QueriestheverticalvalueofaΔTcursor. 5-89
DISPlay Group
:DISPlay?
Queries all display settings. 5-90
:DISPlay:ACCumulate?
Queries all accumulated waveform display settings. 5-90
:DISPlay:ACCumulate:MODE
Sets or queries the accumulation mode. 5-90
:DISPlay:ACCumulate:PERSistence
Sets or queries the accumulation time. 5-90
:DISPlay:COLor?
Queries all waveform color settings. 5-90
:DISPlay:COLor:{CHANnel<x>|MATH
<x>}
Sets or queries a waveform color. 5-90
:DISPlay:COLor:LSTate
Sets or queries the color of the logic-waveform state display. 5-90
:DISPlay:COLor:SERialbus<x>?
Queries the color settings of all trends of the specified serial bus. 5-90
:DISPlay:COLor:SERialbus<x>:TRE
Nd<y>
Sets or queries the serial bus trend color. 5-90
:DISPlay:FORMat
Sets or queries the display format. 5-90
:DISPlay:FGRid
Sets or queries the on/off status of the fine grid display. 5-91
:DISPlay:GRATicule
Sets or queries the graticule (grid). 5-91
:DISPlay:INTENsity?
Queries all intensity settings for the display items. 5-91
:DISPlay:INTENsity[:WAVeform]
Sets or queries the waveform intensity. 5-91
:DISPlay:INTENsity:{CURSor|GRID
|MARKer|ZBOX}
Sets or queries the intensity of a display item. 5-91
:DISPlay:INTERpolate
Sets or queries the interpolation method. 5-91
:DISPlay:MAPPing
Sets or queries the split screen waveform mapping mode. 5-91
:DISPlay:SMAPping?
Queries all waveform mappings to the split screen. 5-91
:DISPlay:SMAPping:{CHANnel<x>|M
ATH<x>} (Set Mapping)
Sets or queries the split screen mapping of a waveform. 5-91
:DISPlay:SVALue (Scale VALUE)
Sets or queries the on/off status of the scale value display. 5-91
FFT Group
:FFT<x>?
Queries all of the settings for the FFT analysis feature. 5-92
:FFT<x>:AVERage?
Queries all FFT analysis averaging settings. 5-92
:FFT<x>:AVERage:EWEight
Sets or queries the attenuation constant of exponential averaging in FFT
analysis.
5-92
:FFT<x>:DATA?
Queries all the information related to the FFT waveform data that will be
sent.
5-92
:FFT<x>:DATA:BYTeorder
Sets or queries the transmission byte order when the FFT waveform data
format is binary.
5-92
:FFT<x>:DATA:END
Sets or queries the end point of the FFT waveform data that will be sent. 5-92
:FFT<x>:DATA:FORMat
Sets or queries the format of the FFT waveform data that will be sent. 5-92
:FFT<x>:DATA:LENGth?
Queries the total number of data points of the FFT waveform that will be
sent.
5-92
:FFT<x>:DATA:SEND?
Queries the FFT waveform data. 5-92
:FFT<x>:DATA:STARt
Sets or queries the start point of the FFT waveform data that will be sent. 5-93
:FFT<x>:DISPlay
Sets or queries whether or not FFT analysis will be performed. 5-93
:FFT<x>:HORizontal?
Queries all horizontal axis settings for FFT analysis. 5-93
:FFT<x>:HORizontal:CSPan?
Queries all center and span settings for the horizontal axis for FFT analysis. 5-93
:FFT<x>:HORizontal:CSPan:CENTer
Sets or queries the center value of the horizontal axis for FFT analysis. 5-93
:FFT<x>:HORizontal:CSPan:SPAN
Sets or queries the span value of the horizontal axis for FFT analysis. 5-93
:FFT<x>:HORizontal:LRIGht?
Queries all of the setting for the left and right ends of the horizontal axis for
FFT analysis.
5-93
:FFT<x>:HORizontal:LRIGht:RANGe
Sets or queries the range for the left and right ends of the horizontal axis for
FFT analysis.
5-93
:FFT<x>:HORizontal:MODE
Sets or queries the FFT analysis horizontal axis mode. 5-93
:FFT<x>:LENGth
Sets or queries the number of FFT points for FFT analysis. 5-93
To Next Page
Loading...
