YOKOGAWA DLM2000 Series - Page 42

5-9
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
5.1 List of Commands
Command Function Page
:FFT<x>:MEASure?
Queries all automatic measurement settings for FFT analysis. 5-94
:FFT<x>:MEASure:MARKer?
Queries all marker cursor measurement settings for FFT analysis. 5-94
:FFT<x>:MEASure:MARKer[:BASic]?
Queries all Basic marker cursor item settings for FFT analysis. 5-94
:FFT<x>:MEASure:MARKer[:BASic]:
ALL
Collectively turns on or off all Basic marker cursor items for FFT analysis. 5-94
:FFT<x>:MEASure:MARKer[:BASic]:
DFRequency?
Queries all of the settings for frequency measurement between marker
cursors for FFT analysis.
5-94
:FFT<x>:MEASure:MARKer[:BASic]:
DFRequency:STATe
Sets or queries the on/off status of the frequency measured between marker
cursors for FFT analysis.
5-94
:FFT<x>:MEASure:MARKer[:BASic]:
DFRequency:VALue?
Queries the frequency between marker cursors for FFT analysis. 5-94
:FFT<x>:MEASure:MARKer[:BASic]:
DV?
Queries all of the settings for level measurement between marker cursors for
FFT analysis.
5-94
:FFT<x>:MEASure:MARKer[:BASic]:
DV:STATe
Sets or queries the on/off status of the level measured between marker
cursors for FFT analysis.
5-94
:FFT<x>:MEASure:MARKer[:BASic]:
DV:VALue?
Queries the level between marker cursors for FFT analysis. 5-94
:FFT<x>:MEASure:MARKer[:BASic]:
FREQuency<y>?
Queries all of the settings for frequency measurement of a marker cursor for
FFT analysis.
5-94
:FFT<x>:MEASure:MARKer[:BASic]:
FREQuency<y>:STATe
Sets or queries the on/off status of the frequency of marker cursor for FFT
analysis.
5-95
:FFT<x>:MEASure:MARKer[:BASic]:
FREQuency<y>:VALue?
Queries the frequency of a marker cursor for FFT analysis. 5-95
:FFT<x>:MEASure:MARKer[:BASic]:
POSition<y>
Sets or queries the position of a marker cursor for FFT analysis. 5-95
:FFT<x>:MEASure:MARKer[:BASic]:
V<y>?
Queries all of the settings for level measurement of a marker cursor for FFT
analysis.
5-95
:FFT<x>:MEASure:MARKer[:BASic]:
V<y>:STATe
Sets or queries the on/off status of the level of marker cursor for FFT
analysis.
5-95
:FFT<x>:MEASure:MARKer[:BASic]:
V<y>:VALue?
Queries the level of a marker cursor for FFT analysis. 5-95
:FFT<x>:MEASure:MODE
Sets or queries the FFT analysis automatic measurement mode. 5-95
:FFT<x>:MEASure:PEAK?
Queries all peak measurement settings for FFT analysis. 5-95
:FFT<x>:MEASure:PEAK[:BASic]?
Queries all Basic peak item settings for FFT analysis. 5-95
:FFT<x>:MEASure:PEAK[:BASic]:A
LL
Collectively turns on or off all Basic peak items for FFT analysis. 5-96
:FFT<x>:MEASure:PEAK[:BASic]:DF
Requency?
Queries all of the settings for frequency measurement between peak values
for FFT analysis.
5-96
:FFT<x>:MEASure:PEAK[:BASic]:DF
Requency:STATe
Sets or queries the on/off status of the frequency measured between peak
values for FFT analysis.
5-96
:FFT<x>:MEASure:PEAK[:BASic]:DF
Requency:VALue?
Queries the frequency between peak values for FFT analysis. 5-96
:FFT<x>:MEASure:PEAK[:BASic]:
DV?
Queries all of the settings for power measurement between peak values for
FFT analysis.
5-96
:FFT<x>:MEASure:PEAK[:BASic]:DV
:STATe
Sets or queries the on/off status of the power measured between peak
values for FFT analysis.
5-96
:FFT<x>:MEASure:PEAK[:BASic]:DV
:VALue?
Queries the power between peak values for FFT analysis. 5-96
:FFT<x>:MEASure:PEAK[:BASic]:FR
EQuency<y>?
Queries all of the settings for a peak frequency for FFT analysis. 5-96
:FFT<x>:MEASure:PEAK[:BASic]:FR
EQuency<y>:STATe
Sets or queries the on/off status of a peak frequency value for FFT analysis. 5-96
:FFT<x>:MEASure:PEAK[:BASic]:FR
EQuency<y>:VALue?
Queries a peak frequency value for FFT analysis. 5-97
:FFT<x>:MEASure:PEAK[:BASic]:RA
NGe<y>
Sets or queries the measurement range of a peak value for FFT analysis. 5-97
:FFT<x>:MEASure:PEAK[:BASic]:V
<y>?
Queries all of the settings for a peak value for FFT analysis. 5-97
:FFT<x>:MEASure:PEAK[:BASic]:V<
y>:STATe
Sets or queries the on/off status of a peak value for FFT analysis. 5-97
:FFT<x>:MEASure:PEAK[:BASic]:V<
y>:VALue?
Queries a peak value for FFT analysis. 5-97
:FFT<x>:MODE
Sets or queries the waveform display mode for FFT analysis. 5-97
:FFT<x>:RANGe
Sets or queries the measurement source window for FFT analysis. 5-97