5-10
IM 710105-17E
5.1 List of Commands
Command Function Page
:FFT<x>:RPOSition
Sets or queries the center point for magnifying the vertical axis for FFT
analysis.
5-97
:FFT<x>:TRACe
Sets or queries the source waveform for FFT analysis. 5-97
:FFT<x>:TYPE
Sets or queries the spectrum for FFT analysis. 5-98
:FFT<x>:UNIT?
Queries all FFT computation unit settings. 5-98
:FFT<x>:UNIT[:DEFine]
Sets or queries an FFT computation unit. 5-98
:FFT<x>:UNIT:MODE
Sets or queries whether an FFT computation unit will be attached
automatically or manually.
5-98
:FFT<x>:VERTical?
Queries all vertical axis settings for FFT analysis. 5-98
:FFT<x>:VERTical:LEVel
Sets or queries the vertical axis display position for FFT analysis. 5-98
:FFT<x>:VERTical:MODE
Sets or queries the FFT analysis vertical axis mode. 5-98
:FFT<x>:VERTical:SENSitivity
Sets or queries the vertical sensitivity for FFT analysis. 5-98
:FFT<x>:VTDisplay
Sets or queries the on/off status of the VT waveform display for FFT analysis. 5-98
:FFT<x>:WINDow
Sets or queries the window function for FFT analysis. 5-99
FILE Group
:FILE?
Queries all settings for data storage. 5-100
:FILE:COPY:ABORt
Aborts file copying. 5-100
:FILE:COPY:CDIRectory
Changes the file copy destination directory. 5-100
:FILE:COPY:DRIVe
Sets the file copy source medium. 5-100
:FILE:COPY[:EXECute]
Executes file copying. This is an overlap command. 5-100
:FILE:COPY:PATH?
Queries the file copy destination directory. 5-100
:FILE:DELete:{AHIStogram|ASCii|
BINary|BMP|FFT|HLISt|JPEG|MEASu
re|PNG|SBUS|SETup|SNAP|ZPOLygon
|ZWAVe}[:EXECute]
Deletes a specific type of data file. This is an overlap command. 5-100
:FILE[:DIRectory]:CDIRectory
Changes the current directory. 5-100
:FILE[:DIRectory]:DRIVe
Sets the current medium. 5-100
:FILE[:DIRectory]:FREE?
Queries the free space on the current medium in bytes. 5-100
:FILE[:DIRectory]:MDIRectory
Creates a directory in the current directory. This is an overlap command. 5-100
:FILE[:DIRectory]:PATH?
Queries the current directory. 5-101
:FILE:LOAD:BINary:ABORt
Aborts the loading of waveform data. 5-101
:FILE:LOAD:BINary[:EXECute]
Loads waveform data. This is an overlap command. 5-101
:FILE:LOAD:{SETup|SNAP|ZPOLygon
<x>|ZWAVe<x>}:ABORt
Aborts the loading of a specific type of data. 5-101
:FILE:LOAD:{SETup|SNAP|ZPOLygon
<x>|ZWAVe<x>}[:EXECute]
Loads a specific type of data. This is an overlap command. 5-101
:FILE:MOVE:ABORt
Aborts file moving. 5-101
:FILE:MOVE:CDIRectory
Changes the file move destination directory. 5-101
:FILE:MOVE:DRIVe
Sets the file move destination medium. 5-101
:FILE:MOVE[:EXECute]
Executes file moving. This is an overlap command. 5-101
:FILE:MOVE:PATH?
Queries the file move destination directory. 5-101
:FILE:PROTect[:EXECute]
Turns file protection on or off. 5-101
:FILE:REName[:EXECute]
Renames a file. 5-101
:FILE:SAVE?
Queries all file save settings. 5-101
:FILE:SAVE:{AHIStogram|ASCii|BI
Nary|FFT|HLISt|HARMonics|SBUS|Z
WAVe}?
Queries all of the settings related to the saving of a specified type of file. 5-101
:FILE:SAVE:{AHIStogram|ASCii|BI
Nary|FFT|HLISt|HARMonics|MEASur
e|SBUS|SETup|SNAP|ZWAVe}:ABORt
Aborts the saving of a specific type of data. 5-102
:FILE:SAVE:{AHIStogram|ASCii|
BINary|FFT|HLISt|HARMonics|ME
ASure|SBUS|SETup|SNAP|ZWAVe}
[:EXECute]
Saves a specific type of file. This is an overlap command. 5-102
:FILE:SAVE:{AHIStogram|FFT|HARM
onics|SBUS|ZWAVe}:SELect
Sets or queries the area of a specific type of data to save. 5-102
:FILE:SAVE:ANAMing
Sets or queries the on/off status of the auto naming feature for saving files. 5-102
:FILE:SAVE:{ASCii|BINary}:COMPr
ession
Sets or queries the save compression method of a specific type of data. 5-102
:FILE:SAVE:{ASCii|BINary}:HISTo
ry
Sets or queries how history waveforms will be saved. 5-102
To Next Page
Loading...
