YOKOGAWA DLM2000 Series - Page 44

5-11
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
5.1 List of Commands
Command Function Page
:FILE:SAVE:{ASCii|BINary}:LENG
th
Sets or queries the number of data points to save when compressing or
sampling (decimating) various types of data.
5-102
:FILE:SAVE:{ASCii|BINary}:RANGe
Sets or queries the save range for a specific type of data. 5-102
:FILE:SAVE:{ASCii|BINary}:TRACe
Sets or queries the waveforms to save for a specific type of data. 5-102
:FILE:SAVE:ASCii:TINFormation
(Time Information)
Sets or queries whether waveform data is saved with time information (ON)
or without it (OFF).
5-103
:FILE:SAVE:FFT:FINFormation
(Frequency Information)
Sets or queries whether FFT data is saved with frequency information (ON)
or without it (OFF).
5-103
:FILE:SAVE:COMMent
Sets or queries the comment that will be attached to the data that will be
saved.
5-103
:FILE:SAVE:NAME
Sets or queries the file name for the data that will be saved. 5-103
:FILE:SAVE:SBUS:COMPression
Sets or queries the save compression method of SENT data. 5-103
:FILE:SAVE:SBUS:HISTory
Sets or queries the history for which serial bus data will be saved. 5-103
:FILE:SAVE:SBUS:LENGth
Sets or queries the number of data points to save when compressing or
sampling (decimating) SENT data.
5-103
:FILE:SAVE:SBUS:TINFormation
(Time Information)
Sets or queries whether SENT waveform data is saved with time information
(ON) or without it (OFF).
5-103
:FILE:SAVE:SBUS:TYPe
Sets or queries the save method of SENT data. 5-103
GONogo Group
:GONogo?
Queries all GO/NO-GO determination settings. 5-104
:GONogo:ABORt
Aborts GO/NO-GO determination. 5-104
:GONogo:ACTion?
Queries all of the settings related to the action executed when GO/NO-GO
results are NO-GO and the reference.
5-104
:GONogo:ACTion:BUZZer
Sets or queries whether or not the DLM2000 will sound an alarm when a
GO/NO-GO result is NO-GO.
5-104
:GONogo:ACTion:HCOPy
Sets or queries whether or not the DLM2000 will print screen images to the
optional built-in printer or an external printer for NO-GO results.
5-104
:GONogo:ACTion:MAIL?
Queries all of the settings related to email notification for NO-GO results. 5-104
:GONogo:ACTion:MAIL:COUNt
Sets or queries the upper limit of emails that will be sent for NO-GO results. 5-104
:GONogo:ACTion:MAIL:MODE
Sets or queries whether or not the DLM2000 will send email notification for
NO-GO results.
5-104
:GONogo:ACTion:SAVE
Sets or queries whether or not the DLM2000 will save waveform data to the
storage medium for NO-GO results.
5-104
:GONogo:COUNt?
Queries the number of performed GO/NO-GO determinations. 5-104
:GONogo:EXECute
Executes GO/NO-GO determination. This is an overlap command. 5-104
:GONogo:LOGic
Sets or queries the GO/NO-GO determination logic. 5-104
:GONogo:NGCount?
Queries the GO/NO-GO determination NO-GO count. 5-104
:GONogo:NGStopcount
Sets or queries the number of NO-GO results at which the DLM2000 will
stop performing determinations.
5-105
:GONogo:STOPcount
Sets or queries the number of acquisitions at which the DLM2000 will stop
performing determinations.
5-105
:GONogo:WAIT?
Waits for the completion of GO/NO-GO determination by using a timeout
timer.
5-105
:GONogo[:ZPARameter]?
Queries all zone and parameter determination settings. 5-105
:GONogo[:ZPARameter]:NUMBer<x>?
Queries all of the settings related to the specified reference standard for
zone or parameter determination.
5-105
:GONogo[:ZPARameter]:NUMBer<x>:
CAUSe?
Queries whether or not the specified waveform parameter is the cause of a
NO-GO zone or parameter determination.
5-105
:GONogo[:ZPARameter]:NUMBer<x>:
CONDition
Sets or queries the specified waveform parameter’s reference condition for
zone or parameter determination.
5-105
:GONogo[:ZPARameter]:NUMBer<x>:
MODE
Sets or queries the specified reference standard mode. 5-105
:GONogo[:ZPARameter]:NUMBer<x>:
PARameter?
Queries all parameter settings for the specified reference standard. 5-105
:GONogo[:ZPARameter]:NUMBer<x>:
PARameter:ITEM
Sets or queries the specified waveform parameter’s item for parameter
determination.
5-106
:GONogo[:ZPARameter]:NUMBer<x>:
PARameter:LIMit
Sets or queries the specified waveform parameter’s upper and lower limits
for parameter determination.
5-106
:GONogo[:ZPARameter]:NUMBer<x>:
PARameter:TRACe
Sets or queries the specified waveform parameter’s source waveform for
parameter determination.
5-106
:GONogo[:ZPARameter]:NUMBer<x>:
PARameter:VALue?
Queries the specified waveform parameter’s measured value for parameter
determination.
5-106