YOKOGAWA DLM4038 - Page 48

5-15
IM DLM4038-17EN
Commands
1
2
3
4
5
6
App
Index
Command Function Page
INITialize Group
:INITialize:EXECute
Executes initialization. 5-123
:INITialize:UNDO
Undoes initialization. 5-123
LOGic Group
:LOGic?
Queries all logic input waveform settings. 5-124
:LOGic:PODA?
Queries all settings of logic input port A. 5-124
:LOGic:PODA:ALL?
Queries all bit settings of logic input port A. 5-124
:LOGic:PODA:ALL:DISPlay
Turns on or off all bit displays of logic input port A. 5-124
:LOGic:PODA:ALL:LEVel
Sets the user-defined threshold level for logic input port A. 5-124
:LOGic:PODA:ALL:TYPE
Selects the threshold level for logic input port A. 5-124
:LOGic:PODA:BIT<x>?
Queries all settings of a bit of logic input port A. 5-124
:LOGic:PODA:BIT<x>:DISPlay
Turns on or off all bit displays of logic input port A. 5-124
:LOGic:PODA:BIT<x>:LABel
Sets or queries the label of a bit of logic input port A. 5-124
:LOGic:PODA:BIT<x>:LEVel
Sets or queries the user-defined threshold level of a bit of logic input port A. 5-124
:LOGic:PODA:BIT<x>:TYPE
Selects the threshold level of a bit of logic input port A. 5-125
:LOGic:PODA:DESKew
Sets or queries the deskewing of logic input port A. 5-125
:LOGic:PODA:HYSTeresis
Sets or queries the hysteresis of logic input port A. 5-125
:LOGic:PODA_PODB?
Queries all settings of logic input ports A and B. 5-125
:LOGic:PODA_PODB:BITOrder
Sets or queries the location of logic input ports A and B. 5-125
:LOGic:PODA_PODB:BUS2?
Queries all bus settings of logic input ports A and B. 5-125
:LOGic:PODA_
PODB:BUS2:ASSignment
Sets or queries the assignment of a bus of logic input ports A and B. 5-125
:LOGic:PODA_PODB:BUS2:DISPlay
Sets or queries the display on/off status of a bus of logic input ports A and B. 5-125
:LOGic:PODA_PODB:BUS2:FORMat
Sets or queries the display format (bus display) of a bus of logic input ports A
and B.
5-125
:LOGic:PODA_PODB:BUS2:LABel
Sets or queries the label of a bus of logic input ports A and B. 5-126
:LOGic:PODA_PODB:BUS3?
Queries all bus settings of logic input ports A and B. 5-126
:LOGic:PODA_
PODB:BUS3:ASSignment
Sets or queries the assignment of a bus of logic input ports A and B. 5-126
:LOGic:PODA_PODB:BUS3:DISPlay
Sets or queries the display on/off status of a bus of logic input ports A and B. 5-126
:LOGic:PODA_PODB:BUS3:FORMat
Sets or queries the display format (bus display) of a bus of logic input ports A
and B.
5-126
:LOGic:PODA_PODB:BUS3:LABel
Sets or queries the label of a bus of logic input ports A and B. 5-126
:LOGic:PODA_PODB:MODE
Sets or queries the display on/off status of logic input ports A and B. 5-126
:LOGic:PODA_PODB:POSition
Sets or queries the logic signal’s vertical position of logic input ports A and B. 5-126
:LOGic:PODA_PODB:SIZE
Sets or queries the logic signal’s display size of logic input ports A and B. 5-127
:LOGic:PODA_PODB:STATe?
Queries all state display settings of logic input ports A and B. 5-127
:LOGic:PODA_
PODB:STATe:ASSignment?
Queries state display assignments of logic input ports A and B. 5-127
:LOGic:PODA_
PODB:STATe:ASSignment:ALL
Sets the state display assignments of all bits of logic input ports A and B. 5-127
:LOGic:PODA_
PODB:STATe:ASSignment<x>:BIT
Sets or queries the display assignments of all bits of logic input ports A and B. 5-127
:LOGic:PODA_
PODB:STATe:ASSignment:BUS2
Sets or queries the state display assignment bus setting of logic input ports A
and B.
5-127
:LOGic:PODA_
PODB:STATe:ASSignment:BUS3
Sets or queries the state display assignment bus setting of logic input ports A
and B.
5-127
:LOGic:PODA_PODB:STATe:CLOCk
Sets or queries the state display reference clock waveform of logic input
ports A and B.
5-127
:LOGic:PODA_
PODB:STATe:HYSTeresis
Sets or queries the hysteresis of the state display reference clock waveform
of logic input ports A and B.
5-128
:LOGic:PODA_PODB:STATe:MODE
Sets or queries the state display on/off status of a bus of logic input ports A
and B.
5-128
:LOGic:PODA_PODB:STATe:POLarity
Sets or queries the polarity of the state display reference clock waveform of
logic input ports A and B.
5-128
:LOGic:PODA_
PODB:STATe:THReshold
Sets or queries the detection level of the state display reference clock
waveform of logic input ports A and B.
5-128
:LOGic:PODB?
Queries all settings of logic input port B. 5-128
:LOGic:PODB:ALL?
Queries all bit settings of logic input port B. 5-128
:LOGic:PODB:ALL:DISPlay
Turns on or off all bit displays of logic input port B. 5-128
5.1 List of Commands