5-26
IM DLM4038-17EN
Command Function Page
:SERialbus<x>:CXPI:SEARch:SETup
[:IDData]:DATA?
Queries all data settings for the ID and data conditions for CXPI bus signal
searching.
5-175
:SERialbus<x>:CXPI:SEARch:SETup
[:IDData]:DATA:BCOunt
Sets or queries the pattern comparison position, which is one of the ID and
data conditions, for CXPI bus signal searching.
5-175
:SERialbus<x>:CXPI:SEARch:SETup
[:IDData]:DATA:CONDition
Sets or queries the comparison condition, which is one of the ID and data
conditions, for CXPI bus signal searching.
5-176
:SERialbus<x>:CXPI:SEARch:SETup
[:IDData]:DATA:DBYTe
Sets or queries the number of data bytes, which is one of the ID and data
conditions, for CXPI bus signal searching.
5-176
:SERialbus<x>:CXPI:SEARch:SETup
[:IDData]:DATA:DECimal<y>
Sets a reference value, which is one of the ID and data conditions, for CXPI
bus signal searching in decimal notation.
5-176
:SERialbus<x>:CXPI:SEARch:SETup
[:IDData]:DATA:ENDian
Sets or queries the byte order of the reference values, which is one of the ID
and data conditions, for CXPI bus signal searching.
5-176
:SERialbus<x>:CXPI:SEARch:SETup
[:IDData]:DATA:HEXa<y>
Sets a reference value, which is one of the ID and data conditions, for CXPI
bus signal searching in hexadecimal notation.
5-176
:SERialbus<x>:CXPI:SEARch:SETup
[:IDData]:DATA:MODE
Sets or queries the ID and data condition (enabled/disabled) for CXPI bus
signal searching.
5-176
:SERialbus<x>:CXPI:SEARch:SETup
[:IDData]:DATA:MSBLsb
Sets or queries the MSB and LSB bits for the data, which is one of the ID
and data conditions, for CXPI bus signal searching.
5-177
:SERialbus<x>:CXPI:SEARch:SETup
[:IDData]:DATA:PATTern<y>
Sets a reference value, which is one of the ID and data conditions, for CXPI
bus signal searching in binary notation.
5-177
:SERialbus<x>:CXPI:SEARch:SETup
[:IDData]:DATA:PFORmat
Sets or queries the data input format, which is one of the ID and data
conditions, for CXPI bus signal searching.
5-177
:SERialbus<x>:CXPI:SEARch:SETup
[:IDData]:DATA:SIGN
Sets or queries whether signed or unsigned data format will be used, which
is one of the ID and data conditions, for CXPI bus signal searching.
5-177
:SERialbus<x>:CXPI:SEARch:SETup
[:IDData]:FINFormation?
Queries all frame information settings for the ID and data conditions for CXPI
bus signal searching.
5-177
:SERialbus<x>:CXPI:SEARch:SETup
[:IDData]:FINFormation:CT
Sets or queries the frame information counter value, which is one of the ID
and data conditions, for CXPI bus signal searching.
5-177
:SERialbus<x>:CXPI:SEARch:SETup
[:IDData]:FINFormation:MODE
Sets or queries the frame information (enabled/disabled), which is one of the
ID and data conditions, for CXPI bus signal searching.
5-178
:SERialbus<x>:CXPI:SEARch:SETup
[:IDData]:FINFormation:SLEEP
Sets or queries the frame information sleep bit, which is one of the ID and
data conditions, for CXPI bus signal searching.
5-178
:SERialbus<x>:CXPI:SEARch:SETup
[:IDData]:FINFormation:WAKeup
Sets or queries the frame information wakeup bit, which is one of the ID and
data conditions, for CXPI bus signal searching.
5-178
:SERialbus<x>:CXPI:SEARch:SETup
[:IDData]:ID?
Queries all ID settings for the ID and data conditions for CXPI bus signal
searching.
5-178
:SERialbus<x>:CXPI:SEARch:SETup
[:IDData]:ID:HEXa
Sets an ID, which is one of the ID and data conditions, for CXPI bus signal
searching in hexadecimal notation.
5-178
:SERialbus<x>:CXPI:SEARch:SETup
[:IDData]:ID:MODE
Sets or queries the ID condition (enabled/disabled), which is one of the ID
and data conditions, for CXPI bus signal searching.
5-178
:SERialbus<x>:CXPI:SEARch:SETup
[:IDData]:ID:PATTern
Sets or queries the ID, which is one of the ID and data conditions, for CXPI
bus signal searching in binary notation.
5-178
:SERialbus<x>:CXPI:SEARch:SETup
[:IDData]:ID:PFORmat
Sets or queries the ID input format, which is one of the ID and data
conditions, for CXPI bus signal searching.
5-179
:SERialbus<x>:CXPI:SEARch:SETup
[:IDData]:ID:PTYPE
Sets or queries the PTYPE comparison condition, which is one of the ID and
data conditions, for CXPI bus signal searching.
5-179
:SERialbus<x>:CXPI:SEARch:SETup
:MODE
Sets or queries the CXPI bus signal search type. 5-179
:SERialbus<x>:CXPI:SEARch:SETup
:WAKeupsleep?
Queries all wakeup and sleep settings for CXPI bus signal searching. 5-179
:SERialbus<x>:CXPI:SEARch:SETup
:WAKeupsleep:SFRame
Sets or queries the CXPI bus signal search sleep frame setting. 5-179
:SERialbus<x>:CXPI:SEARch:SETup
:WAKeupsleep:SLEEP
Sets or queries the CXPI bus signal search sleep (clock unavailable
condition) setting.
5-179
:SERialbus<x>:CXPI:SEARch:SETup
:WAKeupsleep:WAKeup
Sets or queries the CXPI bus signal search wakeup (clock available
condition) setting.
5-179
:SERialbus<x>:CXPI:SEARch:SETup
:WAKeupsleep:WPULse
Sets or queries the CXPI bus signal search wakeup pulse setting. 5-180
:SERialbus<x>:DECode?
Queries all settings related to the decoding of serial bus signals. 5-180
:SERialbus<x>:DECode[:FORMat]
Sets or queries the decode display format of serial bus signals. 5-180
:SERialbus<x>:DECode:SSCMode
Sets or queries the decode display of the start/stop condition of I
2
C serial
bus signals.
5-180
:SERialbus<x>:DISPlay
Sets or queries whether or not serial bus signal analysis will be performed. 5-180
:SERialbus<x>:FLEXray?
Queries all FlexRay bus signal settings. 5-180
5.1 List of Commands
To Next Page
Loading...
