YOKOGAWA DLM4038 - Page 58

5-25
IM DLM4038-17EN
Commands
1
2
3
4
5
6
App
Index
Command Function Page
:SERialbus<x>:CANFD:SEARch:SETu
p[:IDData]:MSIGnal:SIGNal:CONDi
tion
Sets or queries the signal data condition, which is one of the ID and data
conditions, for CAN FD bus signal searching.
5-171
:SERialbus<x>:CANFD:SEARch:SETu
p[:IDData]:MSIGnal:SIGNal:DECim
al<y>
Sets a signal’s reference value, which is one of the ID and data conditions,
for CAN FD bus signal searching in decimal notation.
5-171
:SERialbus<x>:CANFD:SEARch:SETu
p[:IDData]:MSIGnal:SIGNal:ITEM
Sets the signal item, which is one of the ID and data conditions, for CAN FD
bus signal searching.
5-171
:SERialbus<x>:CANFD:SEARch:SETu
p[:IDData]:RTR
Sets or queries the RTR value, which is one of the ID and data conditions,
for CAN FD bus signal searching.
5-172
:SERialbus<x>:CANFD:SEARch:SETu
p:MODE
Sets or queries the CAN FD bus signal search mode setting. 5-172
:SERialbus<x>:CXPI?
Queries all CXPI bus signal analysis and search settings. 5-172
:SERialbus<x>:CXPI:ANALyze?
Queries all CXPI bus signal analysis settings. 5-172
:SERialbus<x>:CXPI[:ANALyze]:SE
Tup?
Queries all CXPI bus signal analysis bus settings. 5-172
:SERialbus<x>:CXPI[:ANALyze]:SE
Tup:BRATe
Sets or queries the CXPI bus signal analysis bit rate (data transfer rate). 5-172
:SERialbus<x>:CXPI[:ANALyze]:SE
Tup:CEDetection
Sets or queries the enable/disable condition of counter error detection for
CXPI bus signal analysis.
5-172
:SERialbus<x>:CXPI[:ANALyze]:SE
Tup:CTOLerance
Sets or queries the CXPI bus signal analysis clock tolerance. 5-172
:SERialbus<x>:CXPI[:ANALyze]:SE
Tup:SOURce
Sets or queries the CXPI bus signal analysis source. 5-173
:SERialbus<x>:CXPI[:ANALyze]:SE
Tup:TSAMple
Sets or queries the logic value (1 or 0) determination threshold for CXPI bus
signal analysis.
5-173
:SERialbus<x>:CXPI:DETail?
Queries all CXPI bus signal analysis result list settings. 5-173
:SERialbus<x>:CXPI:DETail:DISPl
ay
Sets or queries the display mode for the CXPI bus signal analysis result list. 5-173
:SERialbus<x>:CXPI:DETail:LIST:
ALL?
Queries all the data for all analysis numbers in the CXPI bus signal analysis
result list.
5-173
:SERialbus<x>:CXPI:DETail:LIST:
ITEM?
Queries all items that will be displayed in the CXPI bus signal analysis result
list.
5-173
:SERialbus<x>:CXPI:DETail:LIST:
VALue?
Queries all the data for the specified analysis number in the CXPI bus signal
analysis result list.
5-173
:SERialbus<x>:CXPI:SEARch?
Queries all CXPI bus signal search settings. 5-173
:SERialbus<x>:CXPI:SEARch:ABORt
Aborts the CXPI bus signal search. 5-173
:SERialbus<x>:CXPI:SEARch:EXECu
te
Executes a CXPI bus signal search. 5-173
:SERialbus<x>:CXPI:SEARch:SELe
ct
Sets which detected point to display in the CXPI bus signal search zoom
window and queries the zoom position of the detected point.
5-174
:SERialbus<x>:CXPI:SEARch:SELe
ct? MAXimum
Queries the number of detected points in the CXPI bus signal search. 5-174
:SERialbus<x>:CXPI:SEARch:SET
up?
Queries all CXPI bus signal search condition settings. 5-174
:SERialbus<x>:CXPI:SEARch:SETup
:ERRor?
Queries all CXPI bus signal search error settings. 5-174
:SERialbus<x>:CXPI:SEARch:SETup
:ERRor:CLOCk
Sets or queries the CXPI bus signal search clock error setting. 5-174
:SERialbus<x>:CXPI:SEARch:SETup
:ERRor:COUNter
Sets or queries the CXPI bus signal search counter error setting. 5-174
:SERialbus<x>:CXPI:SEARch:SETup
:ERRor:CRC
Sets or queries the CXPI bus signal search CRC error setting. 5-174
:SERialbus<x>:CXPI:SEARch:SETup
:ERRor:DLENgth
Sets or queries the CXPI bus signal search data length error setting. 5-175
:SERialbus<x>:CXPI:SEARch:SETup
:ERRor:FRAMing
Sets or queries the CXPI bus signal search framing error setting. 5-175
:SERialbus<x>:CXPI:SEARch:SETup
:ERRor:IBS
Sets or queries the CXPI bus signal search IBS error setting. 5-175
:SERialbus<x>:CXPI:SEARch:SETup
:ERRor:PARity
Sets or queries the CXPI bus signal search parity error setting. 5-175
:SERialbus<x>:CXPI:SEARch:SETup
:IDData?
Queries all ID and data condition settings for CXPI bus signal searching. 5-175
5.1 List of Commands