5-41
IM DLM4038-17EN
Commands
5
Command Function Page
:STORe:SETup<x>:COMMent
Sets or queries the comment for the setup data that is stored to the specified
location in the internal memory.
5-241
:STORe:SETup<x>:DATE?
Queries the date and time of the setup data that is stored to the specified
location in the internal memory.
5-241
:STORe:SETup<x>:EXECute
Saves setup data to the specified location in the internal memory. 5-241
:STORe:SETup<x>:LOCK
Sets or queries the data-write protection on/off status for the setup data that
is stored to the specified location in the internal memory.
5-241
SYSTem Group
:SYSTem?
Queries all system settings. 5-242
:SYSTem:BEEP
Generates a beep sound. 5-242
:SYSTem:CLICk
Sets or queries the click sound on/off status. 5-242
:SYSTem:CLOCk?
Queries all date/time settings. 5-242
:SYSTem:CLOCk:DATE
Sets or queries the date. 5-242
:SYSTem:CLOCk:FORMat
Sets or queries the date format. 5-242
:SYSTem:CLOCk:MODE
Sets or queries the on/off status of the date/time display. 5-242
:SYSTem:CLOCk:SNTP?
Queries the date/time setting retrieved using SNTP. 5-242
:SYSTem:CLOCk:SNTP:EXECute
Sets the date and time using SNTP. 5-242
:SYSTem:CLOCk:SNTP:GMTTime
Sets or queries the time difference from Greenwich Mean Time. 5-242
:SYSTem:CLOCk:TIME
Sets or queries the time. 5-242
:SYSTem:DCANcel (Delay Cancel)
Sets or queries whether or not the specified delay value will be applied to
time measurement (on/off).
5-242
:SYSTem:FSIZe? (Font Size)
Queries all font size settings. 5-242
:SYSTem:FSIZe:MEASure
Sets or queries the font size that is used to display the automatically
measured waveform parameters and the cursor measurement values.
5-242
:SYSTem:LANGuage
Sets or queries the message language. 5-243
:SYSTem:LCD?
Queries all LCD settings. 5-243
:SYSTem:LCD:AUTO?
Queries all of the settings for the feature that automatically turns off the LCD
backlight.
5-243
:SYSTem:LCD:AUTO:MODE
Sets or queries the on/off status of the feature that automatically turns off the
LCD backlight.
5-243
:SYSTem:LCD:AUTO:TIME
Sets or queries the amount of time until the LCD backlight is turned off. 5-243
:SYSTem:LCD:BRIGhtness
Sets or queries the LCD brightness. 5-243
:SYSTem:LCD:MODE
Sets or queries the on/off status of the LCD backlight. 5-243
:SYSTem:LMODe (Legacy Mode)
Sets or queries whether to initialize the settings to the default values of
legacy models when Default Setup is executed.
5-243
:SYSTem:MLANguage
Sets or queries the menu language. 5-243
:SYSTem:OCANcel (Offset Cancel)
Sets or queries whether or not the specified offset voltage will be applied to
measurement and computation (on/off).
5-243
:SYSTem:TOUT?
Queries all trigger out settings. 5-243
:SYSTem:TOUT:POLarity
Sets or queries the trigger out polarity. 5-243
:SYSTem:USBKeyboard
Sets or queries the USB keyboard type. 5-244
TIMebase Group
:TIMebase?
Queries all time base settings. 5-245
:TIMebase:SRATe? (Sample RATE)
Queries the sample rate. 5-245
:TIMebase:TDIV
Sets or queries the Time/div value. 5-245
TRIGger Group
:TRIGger?
Queries all trigger settings. 5-246
:TRIGger:ABN?
Queries all A->B (N) trigger settings. 5-246
:TRIGger:ABN:COUNt
Sets or queries the number of times condition B must be met for the A->B (N)
trigger.
5-246
:TRIGger:ACTion?
Queries all action-on-trigger settings. 5-246
:TRIGger:ACTion:ACQCount
Sets or queries the action-on-trigger action. 5-246
:TRIGger:ACTion:BUZZer
Sets or queries the whether or not the DLM4000 will sound an alarm as an
action when trigger conditions are met (on/off).
5-246
:TRIGger:ACTion:HCOPy
Sets or queries whether or not the DLM4000 will print a screen capture as an
action when trigger conditions are met (on/off).
5-246
:TRIGger:ACTion:MAIL?
Queries all of the settings for email notification that is sent when trigger
conditions are met.
5-247
5.1 List of Commands
To Next Page
Loading...
