YOKOGAWA GX20

1-139
IM 04L51B01-01EN
Configuring the GX/GP and Viewing the Settings
1
2
3
4
5
App
Index
Data length
Set the size of recording data per file. Recording data is divided at the specified file size.
The selectable data lengths vary depending on the number of channels to record and the
Recording Interval setting.
A file is also created in the following instances.
• When a file is created manually
• When recording is stopped
• When file creation is executed with the event action function
• After recovering from a power failure
Eventdata(Measurementgroup2)
Setup Item Selectable Range or Options Default Value
Recording interval 100ms, 200ms, 500ms, 1s, 2s, 5s, 10s, 15s,
20s, 30s, 1min, 2min, 5min, 10min, 15min,
20min, 30min
2s
Recording mode Free, Single, Repeat Free
Data length 10min, 20min, 30min, 1h, 2, h, 3h, 4h, 6h,
8h, 12h, 1day, 2day, 3day, 5day, 7day, 14day,
31day
1h
Recording interval
This is the same as Measurement group 1.
Recording mode
This is the same as Measurement group 1.
Data length
This is the same as Measurement group 1.
Record confirmation action
Setup Item Selectable Range or Options Default Value
Confirmation screen Off, On Off
Confirmation screen
Set this to On to display a record start or record stop confirmation screen when the START/
STOP key is used.
If you set this to Off, recording starts or stops immediately when the START/STOP key is
used.
1.13ConfiguringtheDualIntervalSettings(Releasenumber4andlater)