3-10
IM 04L51B01-01EN
3.1.3 Controlling the GX/GP
You can carry out the following operations on the Web application. Note that you cannot
carry out these operation on a GX/GP whose advanced security function (/AS) is enabled.
• Start and stop recording
• Start, stop, reset, and acknowledge computing
• AlarmACK
• Individual alarm ACK (see “Digital” on 3-27.)
• Set the date and time
• Start, stop, and test mail transmission
• Trigger the starting of event data recording
• Execute manual sampling
• Save event data
• Save display data
• Reset relative timers
• Reset match time timers
• Change a batch number, lot number, and batch comment
• View the batch text
• Change the time using SNTP
• Perform a test print
• Execute a file transmission test on the FTP server
• Write messages (see “Writing Messages” in page 3-16 in section 3.1.4, “Monitoring the GX/
GP Data and Controlling the GX/GP from the Monitor Screen”)
• Change the alarm value (see “Digital” on 3-27)
• Change the DO channel output (see “Digital” on 3-27)
• Change the internal switch value (see “Displaying the Internal Switch Status and
Changing the Values” on 3-35)
• Change the login password (see page 3-61 in section 3.1.8, “Changing the Password”)
• Stop all control loops (when a PID control module is in use)
Use the following buttons.
If an operation cannot be carried out from the GX/GP, it will not be possible from the Web
application either. For operations that cannot be carried out, the corresponding buttons will
not be displayed or will not be selectable.
• If the GX/GP does not have the function or is not using the function.
• User restriction is placed on the operation.
• The GX/GP is not in a condition to accept the operation. For example, if the GX/GP is not
recording, you cannot write a message.
3.1 Using the Web Application to Change the GX/GP Settings, Monitor Data, and Control the GX/GP (Web server function)
To Next Page
Loading...
Need help?
General
