3-11
IM 04L51B01-01EN
Using Network Functions (Ethernet interface)
3
Note
The following alternate screen may appear temporarily during operation. This is not an error.
Starting Recording
Follow the procedure below to start recording.
Procedure
1
On the SMARTDAC+ Web Service tab, click Recording.
The Recording dialog box appears.
2
If the batch function is in use, enter numbers in the Batch No., Lot No., Textfield and
Batch Comment boxes.
3
Click Start recording or Start recording and computing.
Recording starts. The indicator below the Recording button turns on.
3.1 Using the Web Application to Change the GX/GP Settings, Monitor Data, and Control the GX/GP (Web server function)
To Next Page
Loading...
