YOKOGAWA GX20

1-236
IM 04L51B01-01EN
Deleting All Patterns
Path
GX/GP: MENU key > Browse tab > Save load > Menu Load settings > Program pattern >
Load program pattern Delete all program patterns
Description
Setup Item Selectable Range or Options Default Value
Delete all program patterns — —
Delete all program patterns
Displays the presence or absence of patterns.
Procedure
1 Tap Execute.
All patterns are deleted.
2 Tap Close.
The GX/GP returns to the original screen.
Operation complete
1.25.7 Loading Setting Parameters, Scale Images, Report Templates, Trusted
Certificates(Releasenumber2andlater),CustomDisplay(/CGoption)
(Releasenumber2andlater),ProgramPattern(/PGoption)(Release
number4andlater),Multi-batchSettings(/BToption)(Releasenumber3
andlater)atOnce
Path
GX/GP: MENU key > Browse tab > Save load > Menu Load settings > All above
Description
Setup Item Selectable Range or Options Default Value
Media kind SD, USB
1
Select folder — —
1 See page 1-152 in section 1.20.1, “Loading Setting Parameters”
Media kind
Set the type of media.
Select folder
Set the folder.
Setup Item Selectable Range or Options Default Value
Load multi-batch settings
1
Off, On Off
1 Appears when the multi-batch function (/BT option) is enabled.
Load multi-batch settings
Set this to On to load multi batch settings.
Load multi-batch settings is fixed to Off when the measurement mode is not Normal.
1.25 Loading Settings