1-237
IM 04L51B01-01EN
Configuring the GX/GP and Viewing the Settings
1
Procedure
1
Tap Media kind, set the medium.
2
Tap Select folder, set the folder.
3
Tap Execute.
All les are loaded.
4
Tap Exit.
The GX/GP returns to the original screen.
Operation complete
For the procedure when the multi-batch function (/BT option) is enabled, see section 3.1.14,
“Loading Setting Parameters,” in the multi-batch function manual (IM 04L51B01-03EN).
Note
• The conditions for loading files depend on the contents of setting parameters, scale images, and
report templates. Check the contents before loading them.
• When you load multi batch settings, all settings except the log are initialized first. Then all the
settings are loaded, and the system is restarted.
1.25 Loading Settings
To Next Page
Loading...
