YOKOGAWA GX20 User Manual

2-78
IM 04L51B01-01EN
2.7.3 CheckingFTPFileTransfers(FTPtransmissiontest)
You can check whether files can be sent from the GX/GP to the FTP server using a test file.
Procedure
1 Press MENU.
The menu screen appears.
2 Tap the Universal tab and then FTP test.
The FTP transmission test screen appears.
3 Tap Primary or Secondary.
The test le is sent.
Operation complete
Items to Check before Performing This Test
• Connect the Ethernet cable correctly. For the connection procedure, see section 3.6,
“Optional Terminal Wiring” in the First Step Guide.
• Check that the Ethernet interface settings are correct.
For the setup procedure, see
page 1-180 in section 1.21, “Configuring the Ethernet Communication Function”.
Checking the Results of the FTP Test
• When an FTP test is executed, a test file named FTP_TEST.TXT is transferred to the
specified FTP destination directory.
• You can also check the result of an FTP test using the FTP log (
see page 2-51
in section 2.3.5, “Displaying Logs”), Web display (
see section 3.1, “Using the Web
Application to Change the GX/GP Settings, Monitor Data, and Control the GX/GP (Web
server function)”), and FLog command (see the setting commands in the communication
command manual).
2.7.4 AdjustingtheClockManually(SNTPtimeadjustment)
You can adjust the clock manually through touch operation. The SNTP client must be
enabled.
For details on the SNTP function, see page 1-188 in section 1.21.5, “Setting the SNTP
Client Function”.
Procedure
1 Press MENU.
The menu screen appears.
2 Tap the Universal tab and then SNTP.
The clock is adjusted.
Operation complete
2.7 Performing Network Related Operations

YOKOGAWA GX20 Specifications

General

Brand	YOKOGAWA
Model	GX20
Category	Recording Equipment
Language	English