YOKOGAWA GX20 User Manual

5-36
IM 04L51B01-01EN
Messages That the Web Application Generates
ErrorMessages
Code Title Description and Corrective Action
Message
E8001 Communication error Unable to finish processing because communication with the
GX/GP failed. Check the communication condition.
A communication error has occurred.
E8002 Authentication error Due to a change in the user registration settings on the GX/
GP, an authentication procedure has occurred while the Web
application was running and has failed. Click OK in the dialog
box to reload the page.
Login failure; the page will be reloaded.
E8003 Configuration loading error This message appears when the Web application fails to load
settings from the GX/GP. The system configuration or settings
on the GX/GP have been changed, and a conflict has occurred
with the settings displayed by the Web application. Check the
system configuration and settings on the GX/GP. Also, check
the communication condition.
Failed to load hardware configuration.
Auxiliary Message
1 There is a communication error or the hardware is
busy.
2 The configuration you are loading is not fully
compatible with the existing configuration of
hardware.
E8004 Configuration updating error This message appears when the Web application fails to
change the GX/GP settings. There is a conflict in the system
configuration or settings between the GX/GP and the Web
application. Reload the settings to align the Web application
settings to the GX/GP settings (settings that have been edited
will be discarded). Error in expression.
A user with the same user name is already registered.
Failed to update hardware configuration.
Auxiliary Message
1 There is a communication error or the hardware is
busy.
2 The configuration you are updating is not fully
compatible with the existing configuration of
hardware.
3 There are invalid MATH expressions.
4 This username is already registered.
E8005 File Set the file name using up to 32 alphanumeric characters.
The file name is invalid.
Auxiliary Message
1 A file name can not contain any of the following
characters. \”*/:<>?|’;
2 The length of file name is up to 32 characters.
E8006 Configuration error When AI channels are being configured, the available alarm
range of channels that are set to Log scale are retrieved
from the GX/GP via communication. If a communication error
occurs during this process, the available range cannot be
retrieved, and this message is displayed.
Failed to update favorite monitors due to communication
error.
Auxiliary Message
1 The configuration is not fully compatible with the
existing configuration of hardware.
E8008 Authentication error The passwords entered for the new password and confirmation
do not match when changing the password at login (when the
password is initialized or when the password is expired).
Enter the same character string for both.
Password entered is incorrect.
E8010 Program operation This message appears when you press RUN PANEL on the
program selection screen when programs are not running on
any of the pattern numbers.
(This function is for switching to a running pattern screen.)
Program operation not started.
E8601 Registration error Use 1 to 16 characters to set the favorite monitor name.
The monitor name must be 1-16 characters in length.
E8602 Registration error Delete at least one favorite monitor and start over, or overwrite
an existing favorite monitor.
Failed to add a monitor because the maximum number
of allowed monitors has been reached.
E8603 Registration error Because the favorite monitor information that the browser
has detected is different from what is stored in the GX/GP,
registering, overwriting, or deleting of the favorite monitor
failed. Reload the page.
Failed to update favorite monitor information; this action
has already been performed. Please reload the page.
Continued on next page
5.2 Troubleshooting

YOKOGAWA GX20 Specifications

General

Brand	YOKOGAWA
Model	GX20
Category	Recording Equipment
Language	English